magazine-button
Home>Robotics>News>Robot sales soar in 2010; peak levels expected for 2011: IFR

Robot sales soar in 2010; peak levels expected for 2011: IFR

Written by  MA Staff March 28, 2011
The robotics industry experienced a comeback in 2010, and robot sales are expected to reach a new peak level in 2011, according to the International Federation of Robotics' (IFR) statistical department, which presented the preliminary results of the annual detailed statistics for industrial robots at Automate 2011 in Chicago last week.

According to IFR, more than 115,000 industrial robots shipped worldwide in 2010 - nearly double the number of units sold in 2009, the lowest year since the early 1990s.  

"The prospects for 2011 and beyond are promising," commented Åke Lindqvist, IFR president. "The robotics industry benefits from the increasing demand for automation, especially in the Asian growing markets, with China on top."

In 2011, a further increase of robot sales between10 and 15 percent is expected. A new peak level of about 130,000 sold units could be reached, IFR predicts. Between 2012 and 2014, a moderate annual growth in average of five percent is more likely.  

In 2010, various regions experienced different rates of recovery in robot sales. Asia was on top with an increase of 127 percent to about 67,000 units, the second highest level ever recorded. About 17,000 units were shipped to the Americas, 87 percent more than in 2009, reaching almost the level of 2008. About 30,000 units were sold in Europe, 45 percent more than in 2009. This is still about 15 percent lower than the peak levels of 2007 and 2008.  

The most dynamic markets were China, the Republic of Korea and the ASEAN countries. Sales to these markets almost tripled. In 2010, the Republic of Korea was on top with almost 23,000 robots sold. Japan recovered with a lower growth rate of 66 percent to about 21,000 units. This is followed by North America, which recovered by 90 percent to about 16,000 units, and China with almost 15,000 units sold (up 170 percent). Germany ranked fourth with about 13,400 units sold (up 57 percent).

The electronics industry, the automotive industry and the metal industry were the main drivers of the high increase of robot sales in 2010.  

Asian markets, such as China, the Republic of Korea and ASEAN countries, will continue to be the driver of the increase in robot sales, according to IFR. However, the possible impact of the recent tsunami in Japan on the worldwide supply chain has not been taken into consideration in preparing the forecasts.

"The whole world is concerned about the terrible catastrophe in Japan and the consequences, which are still not fully apparent. On behalf of the IFR community, I would like to express my deepest sympathy to our Japanese colleagues. In these days, our thoughts are with all the people in Japan. We wish the situation would improve and the country would recover from this disaster soon," stated Lindqvist.

Robot sales to India are still at a low rate, but increasing. It is a promising market with great demand for industrial robots in a wide range of industries, IFR said.  

The recovery of robot installations will continue in Europe and the Americas. The automotive industry is continuing to implement new technologies and use new materials, which will require new manufacturing lines. The application of robots in other industries (i.e. the food and beverage industry and the pharmaceutical industry) will further increase. The growing demand in alternative energy sources after the recent nuclear catastrophe in Japan will also push robot installations (e.g. the production of solar cells etc.), according to IFR. Improvements in safety, flexibility, accuracy and ease of use of robots will facilitate access to new markets.

More detailed information on the final results of robot sales in 2010 by country, application and industry, analyses on robot density, detailed forecasts, special features on robotics and case studies on innovative applications of industrial robots will be published in World Robotics 2011 Industrial Robots this summer.

www.worldrobotics.org
www.ifr.org
Last modified on March 29, 2011

Add comment


Security code
Refresh

North American robotics companies enjoyed one of the industry’s strongest opening quarters ever, according to new statistics released from Robotic Industries Association (RIA), the industry’s trade group.
Category: News
Read more...
Is conventional palletizing dead?: Conventional vs. robotic palletizing Conventional automatic palletizers have been available since the 1950s. In the 1990s, gantry and then jointed-arm robots made significant inroads in palletizing, leading many to conclude that the conventional palletizer’s…
Category: Features
Read more...
North American robotics companies sold more robots in 2011 than ever before, according to new statistics from Robotic Industries Association (RIA), the industry's trade group.
Category: News
Read more...
Kuka Robotics Canada opens new facility Kuka Robotics Canada, a subsidiary of Kuka Roboter GmbH, a supplier of industrial robots, has opened a new facility in Mississauga, Ont.
Category: News
Read more...
Increasingly, cameras and image processing technology - known collectively as machine vision - are being incorporated into robotic manufacturing systems. This approach provides added flexibility, so that the robot can…
Category: Features
Read more...
Robotics will be a major driver for global job creation over the next five years, according to a study conducted by market research firm Metra Martech.
Category: News
Read more...
The draft of the new ANSI RIA R15.06 Robot System Safety Standard was introduced at the 2011 National Robot Safety Conference in Knoxville, Tenn., last month. The new standard is…
Category: News
Read more...
  • Latest Products

    • Robot with flexible design
      Robot with flexible design The powerful, high-speed MH80 robot from Motoman Robotics has a flexible design, allowing it to be used for a variety of material handling applications. The long reach of the MH80…
      Read more...
    • Six-axis robots
      Six-axis robots Denso has increased the maximum payload capacity of its VM Series six-axis articulated robots from 10 kg to 13 kg. The new payload capacity, an increase of 30 percent, allows…
      Read more...
    • Automated flip-top closing technology
      Automated flip-top closing technology CBW Automation, a manufacturer of advanced, high-speed automation solutions for the plastics processing industry, packaging and medical markets, has developed new technology for flip-top caps. The company is offering high-speed…
      Read more...

    MA Online Resource Centre



    Featured Video

    More Videos...