Lean and your leaders: How to get them out of the office and to the gemba
Written by Dr. Timothy Hill November 17, 2011Should I start with how these employers didn't get that Lean was a journey and not a one-time project? Or perhaps I should start with how they didn't move past a 5S assignment. Then I recalled how the reader said that he could not get the site leadership down to the gemba. Bingo. I knew that I had my article.
Most of the time, a Lean initiative goes well. People are rallied around a value stream mapping exercise or they're asked to point out things about their jobs that they don't like. Add a little theory of Lean, a little history and a little go-and-see, and you've pretty much got most Lean training. I've said this before and I'll say it again: Lean's success is only about 20 percent tools and training. The remaining 80 percent is attributable to the support that it receives from senior management.
And that means getting senior managers out of their seats, out of the boardroom and out of the meeting rooms, and to the gemba.
You've got to get them to where the action is. The very best way to do this is to plan ahead. Book their time well ahead of time. Know when you'll be going to the gemba. In manufacturing, I've often involved senior leaders in the first session of the training, and then when we go to the gemba. That way, they'll be in place to acknowledge the start of the Lean commitment and to see things for themselves as one of the team. If you can get them out to the gemba early, you can get them out later on, too.
It's important to get senior leaders out to the gemba in a non-threatening way, and to get them out often. Getting senior leaders out is one thing; doing so in a non-threatening way is another. There can be an impression that senior leaders are "out to get you" if they venture past their office. The more often you can get them out, the greater the chance of beating this stereotype down. I've often gone around the plant with them, guiding their behaviour so that they act like Toyota managers.
Toyota managers ask open-ended questions and will form their decisions based on facts gathered from the workplace. They will not jump to conclusions based on a single observation. They will not punish people for bringing forward a problem (which is really an opportunity); nor will they act on a superficial root cause. They will encourage asking why five times until they get down to an actionable countermeasure.
The greater success you have in engaging leaders in Lean walkabouts, the greater success you will have on your Lean journey. Take pictures. Take lots of pictures, including before and after shots from your 5S work and early Lean successes. Share these with the senior leaders so that they understand the importance of your Lean work and want to see it for themselves.
Still facing resistance? Try taking them to your Lean boards. You'll want to install your Lean boards where everyone can see them. Build the Lean boards up in your communications to employees. Place news about Lean accomplishments in the employee newsletter. Better yet, start a Lean section in your newsletter or regular correspondence. Encourage everyone to take an active part and eventually the senior leaders will take notice.
In addition, try making senior managers a part of the recognition ritual. The In Search of Excellence authors noted that the North American Tool and Die Freezer Award (NAT&DFA) was an excellent tool for building morale, recognizing individual efforts and tying in senior management. The NAT&DFA was handed out once a month to the person with the best continuous improvement idea that month. The award was a $100 bill wrapped around a popsicle, stuck in the freezer of the employee's cafeteria. As simple as this sounds, it really was a rallying point for people on the last day of every month.
Try to get your senior leaders out of the meeting rooms. Engage them, encourage them and intrigue them. It'll work!
Dr. Timothy Hill
Dr. Timothy Hill is an Industrial and Organizational Phychologist and Certified Lean Six Sigma Black Belt with global expertise in Human Resources/Human Capital.
Latest from Dr. Timothy Hill
|
In the 25 years that Jeff Perry has been responsible for electrical test safety at Hammond Power Solutions (HPS), the company has never had an accident related to electrical testing,…
Category: Features
Read more...
When designing safeguarding systems for machines, one of the basic building blocks is the movable guard — doors, panels, gates or other physical barriers that can be opened without using…
Category: Columns
Read more...
Welded Tube of Canada Limited, a steel manufacturer, was fined $120,000 for a violation of the Occupational Health and Safety Act after a worker was injured.
Category: News
Read more...
Ontario is launching a four-month blitz to ensure students are safe and don't get injured while working on their summer jobs.
Category: News
Read more...
Rassaun Steel & Mfg. Co. Ltd., a Simcoe, Ont.-based mechanical and electrical service provider, was fined $70,000 for a violation of the Occupational Health and Safety Act after a worker…
Category: News
Read more...
Southwest Glass Products Inc., a Toronto, Ont.-based glass manufacturer, was fined $50,000 for a violation of the Occupational Health and Safety Act after a worker was injured by a conveyor.
Category: News
Read more...
Surteco Canada Ltd., carrying on business as Doellken-Woodtape, an international manufacturer of plastic edging for use on furniture, was fined $50,000 for a violation of the Occupational Health and Safety…
Category: News
Read more...
In North America, about five to 10 arc flash events occur each day. Arc flashes are responsible for as many as 80 percent of all electrical-related injuries.
Category: Columns
Read more...
| Latest Products
|
MA Online Resource Centre
-
Videos
-
Manufacturing Automation's Editor Reports
Get the latest industry news from our magazine's editor
-
Manufacturing Automation's Editor Reports




