News
April 18, 2019 – Cambridge, Ontario’s Eclipse Automation has officially unveiled its newest 57,000 square-foot facility in Rock Hill, South Carolina.
April 17, 2019 – Hundreds of workers will soon be without jobs following the closure of a Truro, N.S., carpet plant, one of the city's oldest operating manufacturers.
April 16, 2019 – Sitting around a table with fellow Steelworkers, Steve Berniquez starts listing companies that once stood in and around Hawkesbury, a small Ontario town an hour's drive east of Ottawa.
April 15, 2019 – JMP Solutions, a London, Ontario–based industrial technology partner for manufacturers, has been named one of the top 10 largest system integrators in North America in an annual list published by Content for Engineers (CFE) Media in their System Integrator Giants 2019 special report.
April 15, 2019 – Mazda is recalling more than 200,000 Mazda 3 compact cars in the U.S. and Canada because the windshield wipers can fail.
April 12, 2019 – Canadian steel producer Stelco is looking for more support from the federal government as the country's steel and aluminum producers grapple with punishing U.S. tariffs imposed on exports of their products south of the border.
April 11, 2019 – Automate, North America’s largest showcase devoted to automation industry trends, leading-edge technology and business innovation, is moving to Detroit.
April 11, 2019 – Wajax Corporation has announced the resignation of Darren Yaworsky, senior vice-president, finance and chief financial officer, for personal reasons.
April 10, 2019 – Ontario Premier Doug Ford says that while the province hopes the federal government, the City of Toronto and York Region will chip in more than half of a $28.5-billion transit project, Ontario is willing to foot the whole bill.
April 5, 2019 – It’s the last day of the Hannover Messe industrial technology fair for 2019 – so what have we learned?
April 4, 2019 – Industrial technology fair Hannover Messe 2019 is drawing to a close, with more than 220,000 visitors expected to attend by end of day Friday. 
April 3, 2019 – On day three of the Hannover Messe industrial technology fair, Manufacturing AUTOMATION covered a lot of ground between the industrial automation halls – from a session on how business leaders can embrace Industry 4.0, to a demo on smart manufacturing, to a panel discussion on standardization.
April 2, 2019 – Hannover Messe, the world's largest industrial technology fair, is running this week from April 1-5 and Manufacturing AUTOMATION is at the show. 
April 1, 2019 – A second round of auto worker layoffs in recent months has led politicians to jump to assure workers as the automotive sector undergoes significant transformation.
April 1, 2019 – Hannover Messe kicked off in Hannover, Germany today with a focus on Industry 4.0, artificial intelligence and 5G technologies.
Page 1 of 113

Subscription Centre

 
New Subscription
 
Already a Subscriber
 
Customer Service
 
View Digital Magazine Renew

We are using cookies to give you the best experience on our website. By continuing to use the site, you agree to the use of cookies. To find out more, read our Privacy Policy.