Employer fined $115K after worker suffers crushing injury

Saturday January 14, 2017
Written by Ontario Ministry of Labour
Jan. 14, 2017 - A company providing sales and service of tractors and other equipment used in the construction industry pleaded guilty and has been fined $115,000 after a worker suffered injuries from a falling piece of equipment.

On August 21, 2015, a worker at Toromont Industries Ltd. workplace in London, Ont., was injured when one hand became trapped between the concrete floor and a 4,900-pound drive assembly (axle) that had fallen from its support stands in the company’s heavy equipment maintenance shop.                                 

The device had been placed on three support stands and tested to see if was safely balanced on the support stands; however, the test was done while it was still attached to an overhead crane, and it was not solidly secured after part of the drive unit was removed. The weight distribution of the remaining axle assembly changed, resulting in the axle assembly becoming unstable and falling off the support stands. As a result of the incident, the worker suffered serious injuries.

Section 46 of Ontario Regulation 851 (the Industrial Establishments Regulation) requires that machinery, equipment or material that may tip or fall and endanger any worker shall be secured against tipping or falling. The failure to ensure compliance with the regulation was also contrary to the Occupational Health and Safety Act.

The company pleaded guilty to failing to ensure that the measures and procedures prescribed by the regulation were carried out in the workplace, and was fined $115,000.

The court also imposed a 25-per-cent victim fine surcharge as required by the Provincial Offences Act. The surcharge is credited to a special provincial government fund to assist victims of crime.

Add comment


Security code
Refresh

Subscription Centre

 
New Subscription
 
Already a Subscriber
 
Customer Service
 
View Digital Magazine Renew