JVL develops 3000W MAC motor with length of 331.8mm

October 29, 2018 – JVL has developed a new high-capacity integrated servo MAC motor with rating of 3000W.

MAC motors are complete servo systems including a high-dynamic AC servo motor, hall sensors, encoder, power supply, driver and positioning controller and Nano-PLC, as well as facilities for incorporating various control modules such as Bluetooth, WLAN, ZigBee, EtherCAT, EtherNet/IP, CANopen, DeviceNet, Profibus, Profinet, Nano PLC, RS232/RS485/USB, Process Control, etc.

With a length of 311.8mm and torque of 9.55/28.6Nm at 3000rpm, this 3000W MAC motor matches the size of traditional servo motors without built-in controllers with flange 130x130mm. As with the other integrated servo motors in the range (50-3000W), both the motor and all electronic components have been specifically selected to withstand the rigorous demands required by industrial use.

The motor requires connection of the main voltage of 3x400VAC through the M23 connectors. Control voltage for the encoder and microprocessor circuitry is 24VDC. In an emergency-stop situation, where an approved relay has cut off the main power, encoder position and other values are maintained by this control voltage. In some applications, however, this is not needed and in those cases an optional internal 24VDC supply can be used, requiring only an AC main connection. Switching technology is used to ensure low heat generation.

The JVL motors are available through Electromate.